I created a video to demonstrate how I drag solder QFP chips onto PCBs. This one being a CPLD for a PiStorm 600.
I was working on benchmarking some new code on a Raspberry Pi Pico today and…
What should have been a straightforward CD32 recap turned into something far more interesting. The…
Back in the 80s and early 90s, when games often came on floppy disks, the…
A while back I built a 486-based machine to play with some late 80s /…
I managed to score an Amiga 600 motherboard which was faulty for £41. This weekend…
I recently repaired an Amiga 1200 with a difficult to find fault. Unfortunately, it came…
View Comments
Very good job !
What is your iron temperature and which tip size please ?
Hi Manu, many thanks!
Off the top of my head I believe my JBC is set to 340°C, around that mark anyway. The tip is a 1.9mm spoon, JBC C245965.