I created a video to demonstrate how I drag solder QFP chips onto PCBs. This one being a CPLD for a PiStorm 600.
I often see on places such as Facebook that an Amiga owner will show a…
I have been a full time KDE Plasma user for quite a while now. Whilst…
I work building open-source cybersecurity solutions for wolfSSL. These solutions often involve embedded environments, which…
The firmware in my RAMCHECK is very old, there were many updates since then. Unfortunately,…
Whilst repairing vintage machines, a lot of RAM passes by my benches. Most of it…
According to some, the ARK1000VL is considered the fastest VLB graphics card chip you can…
View Comments
Very good job !
What is your iron temperature and which tip size please ?
Hi Manu, many thanks!
Off the top of my head I believe my JBC is set to 340°C, around that mark anyway. The tip is a 1.9mm spoon, JBC C245965.